If you had no problems with TC's, we would
not be here.
Our Motto:
We work for the guy pulling the trigger and
no one else!
Our Mission:
Lead, don't follow, is our creed as we pick
up where the Thompson Center Arms Co. leaves
off in support of the Contender, G2, and
Encore shooting systems. We are here to
solve problems and make them PERFORM!
In short, Thompson Center makes the
Contender/G2 and Encore firearms, but as a
custom shop we are able to go above and
beyond what the factory does to make these
guns work for you!
Supplying innovative solutions to the
problems inherent in TC Contender, G2, and
Encore firearms is what we do, backed by
over 25 years experience serving the people
who shoot them.
These guns are capable of outstanding
accuracy and performance, but they need
special attention beyond what the
manufacturer and other after market shops
provide to make it happen. On this site you
will find the MUST HAVE accessories and
information that are essential to get the
best from them.
Please take a minute to register as a user
of this site by clicking on "Sign Up" to the
right above this text block. Your
information will go no further than for our
use in contacting you as we need to.
If you are a dealer, please "Sign Up" as a
user of this site in order for us to give
you access to the dealer pages and pricing.
I also invite you to join us on our forum.
Just click on the "New Discussion Forum" to
the left and pick the forum categories you
are interested in. Time available, I
participate also.
Refer also to pages on the main site that
give detailed information about benefits of
the various Bellm TCs custom accessories
available here. You will also find
supportive photos and instructions worked
into the descriptions of various items here
in the store.
Some points about our products:
The line of Bellm Custom Springs for Encores
and G2s now includes extra strength "Speedlock"
hammer springs to stop misfires due to
shortened hammer springs, excess headspace,
and "hard" military type primers. These are
available singly or as part of our "spring
kit" that includes our Heavy Duty Locking
Bolt Spring, a lighter trigger/sear spring,
and Speedlock hammer spring.
Bellm Custom Encore & G2 trigger/sear
springs and instructions help provide the
excellent trigger pull latent in these
frames at a very modest cost, plus give the
ability to quickly change trigger pull
weights with ease to match the Encore's &
G2's many uses.
The Tools section provides you with the same
tools I use on a regular basis doing
outstanding trigger jobs on Encores, G2s,
and Contenders so you can do the work
yourself, as have many thousands of
satisfied customers before you using our
instructions as a FREE download from
www.bellmtcs.com or as our printed shop
manual.
One of the best accessories yet is my
Encore/G2 trigger/sear spring pliers! These
are the best I have found for installing
either my custom springs or factory springs.
Be sure to get my FREE download instructions
for disassembling, reassembling, and doing
trigger jobs on Encores from the main
www.bellmtcs.com site . The instructions
apply also to the new G2 frames with only
minor differences.
While the Wyoming Stones are the key to the
smoothest triggers, they are first and
foremost outstanding finishing stones for
sharpening knives to a shaving sharpness,
and they have their own separate section. I
am the only source I know of for this little
known stone, bought directly from the cutter
who has successfully guarded the source of
his secret miracle stone. To my knowledge,
there is no other stone like it. All but the
old original Arkansas stones pale in
comparison, and the Arkansas stones sold
commercially today don't even come close to
the Wyoming Stones. I am proud to
confidently offer these wonderful stones. Be
sure to get one.
Bellm Custom Hammer Extensions are tailored
to each type of TC Contender, G2, and Encore
hammer for optimum fit, not a "one size fits
all" approach. These are the best hammer
extensions available. Try one, and I think
you will agree.
Bellm Accuracy Oversize Hinge Pins tighten
up the barrel to frame fit on Contenders,
G2s, and Encores. They are simply a MUST for
best accuracy from any barrel and remain one
of the most important and cost effective
improvements you can make to Contenders,
G2s, and Encores.
The little understood concept of "headspace"
becomes clear, accurately measured, and
precisely controlled using our Headspace
Indicator which doubles for the quickest and
most precise method of measuring bullet
seating depth without any gizmos, gadgets,
or adaptors. The Bellm Headspace Indicator
is absolutely essential to the best
functioning and accuracy of any breakopen
gun, which includes the Handi-Rifles as
well.
Whether buying for the first time or
reordering, we hope you find the store
helpful and convenient.
Thanks, and Good Shooting!
Mike Bellm
Contender, G2, and Encore are registered
trademarks of the K.W. Thompson Tool Company
doing business as Thompson/Center Arms Co.
